Centrifugal casting stainless steel products

 

"<yoastmark

 

 

Radiant tubes type:

U-type, W-Type, 0-Type, P-type, L-Type, S-Type. Similarly straight-type and also electric radiant tubes.

Application:

One of centrifugal casting stainless steel products. The radiant tubes are working at high temperature environment on average: 800-1200° C. Therefore most of them are used for indirect heating to furnace like CAL (continuous annealing line). Similarly CGL (continuous galvanizing line).

Process:

One of centrifugal casting stainless steel products. First of all centrifugal/spun casting method for tube sections. Furthermore investment casting or sand casting for the bends, hangers. Then welding and finally machining.

Material:

High Nickel and high Chrome heat resistant alloys, Cobalt base alloys. The material like HU, HT, HK, HP, HW, 24/24NbTiZr, 50Cr/50Ni (2.4813), 1.4865, 1.4849, 1.4848, 1.4410, 1.4059, 1.4841, 1.4845, 1.4852, 2.4879 or as per customer’s requirements.

Standard:

ANSI, ASTM, ASME, DIN, GB etc.

20101119102810346

 

 

Stainless steel

roller —Immersion roller, Sink roll, Furnace roller, Bottom roller, Heat resistant roller:

1. Furnace roller

2. Hearth roll

3. immersion roller

4. Heat resistant roller

Application:
One of centrifugal casting stainless steel products.Centrifugal casting stainless steel roll are of good heat, corrosion, wear resistant properties. Almost all working at high temperature environment on average: 800 to 1, 200° C. As a result which are used in the steel mills. Like continuous annealing line, continuous galvanizing line.

Process of centrifugal casting stainless steel products of roll. First of all centrifugal casting for barrel/tube. Furthermore forging for journal/shaft. And static /investment or sand casting for cone/turnings. Then welding and machining and finally grinding.

Material of centrifugal casting stainless steel products of roll: High nickel and high chrome heat resistant alloys, cobalt base alloys. The material like HU, HT, HK, HP, HW, 24/24NbTiZr, 50Cr/50Ni (2.4813), 1.4865, 1.4849, 1.4848, 1.4410, 1.4059, 1.4841, 1.4845, 1.4852, 2.4879 or as per customer’s requirements.

Comments are closed. Posted by: Gavin on

Tags: , ,