CA6NM stainless steel pipe

CA6NM stainless steel pipe not only has good corrosion resistance, weldability, but also has high strength and low temperature toughness . It belongs to low carbon martensite stainless steel, mainly used for hydropower facilities and mine facilities of the wear parts. Such as turbine blades, turbine, roller screen/feeder.Not only to undergo general corrosion
Read More

CA6NM ASTM A743 A743M

CA6NM :A743&A743M A487(CENT INVEST SAND) Grade(UNS):CA6NM  (J91540) Type:12Chromium,4 Nickel, Chemical Requirements: C(max):0.06 Men(max):1.00 Si(max):1.00 P(max):0.04 S(max):0.03 Cr:11.5~14.0 Ni:3.5~4.5 Molybdenum:0.40~1.0 Heat Treatment Requirements: Heat to 1850°F [1010°C] minimum, air cool to 200°F [95°C] or lower prior to any optional intermediate temper and prior to the final temper. The final temper shall
Read More

CF8C ASTM A743&A743M—-Special alloy

CF8C ASTM A743&A743M Grade(UNS): CF8C  (J92710) Type:19 Chromium, 10 Nickel,with Columbium Chemical Requirements: C(max):0.08 Men(max):1.5 Si(max):2.00 P(max):0.04 S(max):0.04 Cr:18.0~21.0 Ni:9.0~12.0 Heat Treatment Requirements: Heat to 1900°F [1040°C] minimum, hold for sufficient time to heat casting to temperature, quench in water or rapid cool by other means Tensile Requirements: Tensile Strength,
Read More

CF20 (SCS12, J92602) Cast Stainless Steel

CF20 ASTM A743&A743M(cent,invent,sand) Grade(UNS):CF20(J92602) Type:19 Chromium, 9 Nickel CF20 Chemical Requirements: C(max):0.20 Men(max):1.5 Si(max):2.00 P(max):0.04 S(max):0.04 Cr:18.0~21.0 Ni:8.0~11.0   Heat Treatment Requirements: Heat to 1900°F [1040°C] minimum, hold for sufficient time to heat casting to temperature, quench in water or rapid cool by other means   metallographic structure: Austenitic stainless steel
Read More

CG12 ASTM A743&A743M

CG12 Grade(UNS):CG12(J93001) Type:22 Chromium, 12 Nickel Chemical Requirements: C(max):0.12 Men(max):1.5 Si(max):2.00 P(max):0.04 S(max):0.04 Cr:20.0~23.0 Ni:10.0~13.0 Heat Treatment Requirements: Heat to 1900°F [1040°C] minimum, hold for sufficient time to heat casting to temperature, quench in water or rapid cool by other means Tensile Requirements: Tensile Strength, min Tensile, ksi: 70 Tensile, MPa:485
Read More

CF8 ASTM A743/A743M

CF8 ASTM A743/A743M  (CENT, INVEST, SAND) Grade(UNS):CF8(J92600) Type:19 Chromium, 9 Nickel  CF8 Chemical Requirements: C(max):0.08 Men(max):1.5 Si(max):2.00 P(max):0.04 S(max):0.04 Cr:18.0~21.0 Ni:8.0~11.0 Heat Treatment Requirements: Heat to 1900°F [1040°C] minimum, hold for sufficient time to heat casting to temperature, quench in water or rapid cool by other means Tensile Requirements: Tensile
Read More

Alloy quick search

Alloy quick search will enable you to  understand the  properties of  special alloys. Enter all or part of a Alloy cast number and get the most relevant results!             For more information about a specific material or its application, Ask our special alloy Experts.

Products & Services

Special metal refers to a special chemical composition (alloying), using a special production process, with a special organization and performance to meet the special needs of metal. Compared with of ordinary materials, special metal has a higher strength and toughness, physical properties, chemical properties, biocompatibility and process performance. According to
Read More

Ductile iron

Ductile iron, Chinese standard:GB/T 1348-1998   Ductile iron cast a single test blocks of the mechanical properties and metallographic structure Grades Intensity of tensionσb≥/MPa Yield strengthσ0.2≥/MPa Elongationδ5≥(%) HardnessHBS The main metallographic structure QT400-18 400 250 18 130~180 Ferrite QT400-15 400 250 15 130~180 Ferrite QT450-10 450 310 10 160~210 Ferrite
Read More